Description
Würth Silicone Spray is a clear, non-staining silicone lubricant and protectant for rubber, plastic and metal. It lays down a slick, water-repellent film that lubricates without attracting dirt, stops rubber seals and gaskets sticking and perishing, and frees sliding and moving parts — and because it is silicone it is safe on plastics and rubber that other lubricants can attack.
What this silicone spray is used for
- Rubber seals, gaskets and hatch/door seals — stops them sticking, squeaking and perishing
- Slides, tracks, runners and hinges — frees sticky moving parts
- Protecting and dressing rubber and plastic trim and fittings
- A dry-ish release/lubricating film where oil would attract dirt
- General lubrication and moisture protection on plastics and metal
How to use
- Clean the surface; spray a light, even film and wipe off any excess.
- Reapply to seals periodically so they stay supple and don’t stick in the cold.
- Keep off walking surfaces and anywhere you later need to paint or bond (silicone resists both).
Key Features
- Clear, non-staining silicone lubricant & protectant
- Safe on rubber, plastic and metal
- Water-repellent; lubricates without attracting dirt
- Stops seals sticking and perishing; frees slides and tracks
- 500 ml aerosol
Safety & Notes
- Flammable aerosol — keep from heat, sparks and flame; pressurised can, do not pierce/burn or store above 50 °C.
- Use with ventilation; avoid breathing spray; wear eye protection. Read the Safety Data Sheet before use.
Dealer notes
- The seal/slide lubricant — sell for hatch and door seals, tracks and rubber trim
- Lead on non-staining + plastic/rubber-safe — where a penetrant or oil would harm or mark
- Warn: don’t use where paint/adhesive must later key (nothing sticks to silicone)
- Everyday consumable — pairs with the cleaning and maintenance range
Genuine Würth. Supplied by Y3 Marine.






