Description
Whale Watermaster Pressure Pump
The Whale Watermaster is Whale’s standard automatic freshwater pressure pump for marine and RV systems — a self-priming pump with an integral pressure switch that runs on demand and stops when the taps close. The fully sealed IP65 motor stands up to the damp of a bilge or locker, and all models run dry without damage and self-prime to 3 m. The Onboard model is the entry single-spec unit.
Specifications
| Model | Flow | Pressure | Outlets | Voltage | Code |
|---|---|---|---|---|---|
| Onboard | 8 L/min (2.0 GPM) | 30 PSI | 1–2 | 12V | |
| Watermaster | 8 L/min (2.0 GPM) | 30 PSI | 1–2 | 12V | |
| Watermaster | 12 L/min (3.0 GPM) | 45 PSI | 3–4 | 12V | |
| Watermaster | 12 L/min (3.0 GPM) | 45 PSI | 3–4 | 24V |
Choosing the right Watermaster
- Onboard 8 L/min / 30 PSI — the entry pump for a 1–2 outlet marine or RV system.
- Watermaster 8 L/min / 30 PSI — a small 1–2 outlet system (galley or head).
- Watermaster 12 L/min / 45 PSI — a 3–4 outlet system at firmer pressure; 12V or 24V.
- For higher flow, adjustable duty or salt-water capability step up to the Whale Universal; for larger demand, the Dual Pressure system.
Installation & dealer notes
- Fit an inlet strainer — grit at the valves is the main cause of weak pressure, leaks and cycling.
- Add an accumulator (Whale Accumulator Tank) on the pressure side to smooth flow, steady the taps and cut cycling — quieter and longer-lived.
- Connections — 15 mm Quick Connect (System 15) built in, with 13 mm barb and 1/2″ BSP tails included; use a short flexible section each side to kill vibration noise.
- Don’t starve the inlet — keep the suction short, full-bore and air-tight; self-primes to 3 m.
- IP65 sealed motor — tolerant of a damp install, but still mount clear of standing bilge water.
Common faults
- Short-cycling: flat/missing accumulator, worn switch, or a downstream leak.
- Loss of prime / pulsing: suction-side air leak or blocked strainer.
- Low pressure: debris or wear in the valves — service the head.
Key features
- Automatic on-demand freshwater pressure — 8 or 12 L/min, 30 or 45 PSI
- Self-priming to 3 m; runs dry safely
- Fully sealed IP65 motor; integral pressure switch
- 15 mm Quick Connect plus 13 mm barb & 1/2″ BSP tails included
- 12V and 24V options; entry-level Onboard model
Genuine Whale (Navico). Supplied by Y3 Marine.





