Description
Whale Universal Pressure Pump
The Whale Universal is the flagship of Whale’s automatic freshwater pressure range — a self-priming diaphragm pump with an integral pressure switch, so it starts the instant a tap opens and stops when it closes. It spans 8 to 18 L/min at up to 45 PSI, feeding anything from a single tender tap to a six-outlet superyacht ring main, and it is rated for fresh or salt water — so it doubles as a washdown pump. All models run dry without damage and self-prime to 3 m.
Specifications
| Flow | Pressure | Outlets | Max head | Voltage | Code |
|---|---|---|---|---|---|
| 8 L/min (2.2 GPM) | 15 PSI | 1–2 | 10 m | 12V | |
| 8 L/min (2.2 GPM) | 45 PSI | 2–3 | 30 m | 12V | |
| 12 L/min (3.2 GPM) | 45 PSI | 3–4 | 30 m | 12V | |
| 12 L/min (3.2 GPM) | 45 PSI | 3–4 | 30 m | 24V | |
| 18 L/min (4.8 GPM) | 45 PSI | 4–6 | 30 m | 12V | |
| 18 L/min (4.8 GPM) | 45 PSI | 4–6 | 30 m | 24V |
Choosing the right Universal
Size the pump to the number of outlets that may run at once:
- 8 L/min — 1–3 outlets; the 15 PSI version suits a single low-pressure tap, the 45 PSI version a small galley+head system.
- 12 L/min — 3–4 outlets; the standard freshwater pump for most vessels.
- 18 L/min — 4–6 outlets and longer runs where several taps open together.
- Match the voltage to the house bank (12 or 24 V); step up to the Dual Pressure system for larger demand.
Installation & dealer notes
- Pre-strainer — fit it. A pivoting pre-strainer is included; grit reaching the valves is the number-one cause of weak pressure, leaks and cycling.
- Accumulator. Add a Whale Accumulator Tank on the pressure side to smooth flow, steady the taps and cut cycling — quieter, with far longer pump and switch life.
- Flexible connections. Use the supplied Quick Connect (System 15), 13 mm barb or 1/2″ BSP tails; a short flexible section each side stops the pump telegraphing noise into the hull.
- Don’t starve the inlet. Keep the suction line short, full-bore and air-tight — self-primes to 3 m; a leaky or restricted inlet causes loss of prime and pulsing.
- Run-indicator wire. Wire the tell-tale output to a light or buzzer so a running/dry-cycling pump is noticed.
- Salt-capable — also serves as a deck/anchor washdown pump; flush with fresh water after salt use.
Common faults
- Short-cycling / won’t stop: flat or missing accumulator, worn pressure switch, or a small leak downstream.
- Loss of prime / pulsing: air leak on the suction side or a blocked pre-strainer.
- Low pressure / won’t cut off: debris or wear in the valves — service the pump head.
Key features
- Automatic on-demand freshwater pressure — 8–18 L/min, up to 45 PSI
- Self-priming to 3 m; runs dry safely; fresh or salt water
- Integral pressure switch; 12V and 24V options
- Quick Connect (System 15) plus 13 mm barb & 1/2″ BSP tails included
- Pivoting pre-strainer and run-indicator wire included
- Aluminium motor housing; corrosion-resistant wetted parts
Genuine Whale (Navico). Supplied by Y3 Marine.





