Description
This genuine Whale kit renews the handwheel and stud that drive the Gusher 30 — the hardware that transmits your effort to the pump. Worn or seized, it robs the pump of its stroke; renewing it restores full, positive pumping.
Dealer notes
- For the Gusher 30; part of keeping the vessel’s large manual pump serviceable.
- Lever assembly and through-deck kit are also available for the Gusher 30.
Fitting & service guide — handles, levers & deck fittings
Handles & lever linkages
- Remove the handle (or isolate an electric pump) before working on the linkage.
- Fit the new handle / lever / rocker arm to the pivot; a light smear of waterproof grease on the pivot keeps the action smooth and slows wear.
- Work the pump by hand and check the stroke is full and positive with no slop, bind or over-travel.
Deck plates & through-deck kits
- Set out the deck penetration carefully; drill and seal the cut edges (especially cored decks) before fitting.
- Bed the deck plate on a marine sealant and fasten evenly so it is watertight; align the handle socket to the pump below.
- Check the operating handle engages fully and the pump reaches full stroke from the deck position.
Keep a spare handle aboard — a manual pump is no use without one.
Genuine Whale (Navico). Supplied by Y3 Marine.


