Description
Whale Gulper IC Adapter
The Gulper IC Adapter converts between Deutsch and ODS connector types so a Gulper IC pump and its IC sensor plug together correctly — useful when mixing newer and older IC components or retrofitting a sensor to an existing pump. Pick the Deutsch → ODS direction that matches the two plugs you are joining.
How the Whale IC system fits together
Whale Intelligent Control (IC) is a float-free drainage system. The control electronics live in the Gulper IC pump, and a sensor detects water without touching it, signalling the pump to run and then stop when the water clears. Every install is one pump plus the one sensor that matches the job:
| Application | Sensor | What it does |
|---|---|---|
| Bilge | IC Strainer 19 mm | Sits in the bilge, senses rising water — turns the Gulper IC into an automatic bilge pump |
| Shower | Gulley IC Shower Sensor | Shower-tray drain body with the sensor built into it |
| Grey waste | IC Two-Way Manifold | Joins two drain lines and senses the combined grey-water level |
The Gulper IC Adapter (Deutsch ↔ ODS) joins mismatched harness plugs when mixing or retrofitting IC parts. Sensing is non-contact — no float to stick, no probe to foul — with a built-in on/off delay to prevent short-cycling.
Dealer notes
- Connectivity only — it adds no sensing. The IC system still needs a sensor (IC Strainer 19 mm, Gulley IC Shower Sensor or IC Two-Way Manifold).
- Check which plug types you are joining before choosing the Deutsch/ODS direction (Male/Female).
Genuine Whale (Navico). Supplied by Y3 Marine.




