Description
The operating handle is what you pump the Urchin with — a lost or broken handle takes the pump out of service. This genuine Whale fixed handle kit restores the Urchin’s fixed-handle configuration.
Dealer notes
- For the fixed-handle Gusher Urchin; a removable-handle version is also available.
- Keep a spare handle aboard — a manual pump is no use without one.
Fitting & service guide — handles, levers & deck fittings
Handles & lever linkages
- Remove the handle (or isolate an electric pump) before working on the linkage.
- Fit the new handle / lever / rocker arm to the pivot; a light smear of waterproof grease on the pivot keeps the action smooth and slows wear.
- Work the pump by hand and check the stroke is full and positive with no slop, bind or over-travel.
Deck plates & through-deck kits
- Set out the deck penetration carefully; drill and seal the cut edges (especially cored decks) before fitting.
- Bed the deck plate on a marine sealant and fasten evenly so it is watertight; align the handle socket to the pump below.
- Check the operating handle engages fully and the pump reaches full stroke from the deck position.
Keep a spare handle aboard — a manual pump is no use without one.
Genuine Whale (Navico). Supplied by Y3 Marine.


