Whale Chimp & Urchin Inlet Valve

Price range: $2.90 through $5.90

Whale Chimp & Urchin Inlet Valve — the replacement inlet (suction-side) non-return valve for the Whale Gusher Chimp and Urchin manual pumps. A worn or fouled inlet valve is a common cause of a manual pump losing prime or going weak. Select your pump model.

Genuine Whale (Navico). Supplied by Y3 Marine.

Add to Quote
SKU: N/A Category:

Description

Whale Chimp & Urchin Inlet Valve

On a manual diaphragm pump the inlet valve opens on the suction stroke to draw water into the pump, then seals on the discharge stroke so the pump holds its prime. When it hardens, fouls on debris or tears, the pump struggles to pick up or loses prime between strokes — making the inlet valve the first, cheapest thing to renew.

Which fits my pump?

Pump model Part
Chimp 1 (first generation) Inlet valve-plate assembly
Gusher Urchin & Chimp 2 Inlet valve

Dealer notes

  • Renew in a pair with the matching outlet valve — the two wear together, so replacing only one usually leaves the other to fail next.
  • Know your generation. The original Chimp 1 uses a one-piece valve-plate; the later Chimp 2 and the Urchin share the same individual valve. Match the selector to the pump you have.
  • Keep a set aboard — a five-minute valve swap revives a manual pump that won’t prime; cheap insurance for a backup bilge or deckwash pump.

Fitting notes

  1. Isolate the pump and open the wet end (cover/clamp screws); note how the old valve sits.
  2. Lift out the worn inlet valve or plate and clean the seat faces so the new one seals cleanly.
  3. Fit the new valve the correct way round (flow direction), then reseat the diaphragm and cover.
  4. Prime and test both strokes — strong suction and discharge with no back-leak.

Genuine Whale (Navico). Supplied by Y3 Marine.

Additional information

Pump Model

Chimp 1, Gusher Urchin & Chimp 2

Type

Manual-pump wet-end inlet non-return valve

Brand

Whale (Navico)