Raritan 1700 Series Water Heater Thermostat

$218.90

Genuine Raritan ignition-protected, adjustable thermostat for the 1700 Series marine water heater — the control that cycles the electric element and sets your stored water temperature. Adjustable 43–71°C (factory set 49°C), so you can store hot for Legionella control and more usable hot water while a tempering valve keeps the outlet safe. Ignition-protected for safe installation in engine and fuel spaces — never substitute a domestic thermostat. A frequent cause of no-heat and overheating faults, so worth checking before condemning the element. Genuine Raritan part WH16.

Available on back-order

Add to Quote
SKU: WH16 Categories: ,

Description

📦 Dispatch & Availability: Raritan spare parts are available on back order and typically dispatch within 10 business days. Non-stock items — including the 1700 Series water heaters — have a lead time of approximately 12–16 weeks from order.

Genuine Raritan ignition-protected, adjustable thermostat for the 1700 Series marine water heater. It controls the electric heating element and sets the stored water temperature — adjustable 43–71°C, factory set to 49°C.

What it does

The thermostat senses tank temperature and cycles the electric element to hold your set point. It is the control that decides how hot the stored water gets and how often the element runs.

Setting the temperature — hot store, tempered outlet

For safety and performance, set the store hot and temper the outlet. Storing water at 60°C or above suppresses Legionella bacteria, which thrive in lukewarm water. The thermostat’s 43–71°C range lets you set the store to 60°C+.

A hotter store also gives you more hot water. Because stored hot water is blended with cold to reach a usable temperature, the hotter the tank, the more litres of warm water each litre of stored water produces — so a hotter setting effectively increases the tank’s usable capacity without fitting a bigger tank. More showers from the same calorifier.

The catch is scald risk, which is why a thermostatic mixing valve (tempering valve) is essential: it limits delivery to a safe ≤50°C at the outlets while you store hot. Store hot, temper down — you gain more usable hot water, Legionella control and scald protection at once. Avoid leaving the thermostat set low ‘to save power’: that is exactly the Legionella risk zone, and it shortens your hot-water supply.

Ignition protection — why it matters

A thermostat makes and breaks an electrical contact every time it cycles, which can spark. In an engine or fuel space that spark is an ignition risk. This thermostat is ignition-protected — its construction contains any arc so it cannot ignite surrounding fuel vapours. A marine-rated, ignition-protected thermostat must always be used; never substitute a domestic household part.

Is it the thermostat? Fault-finding

A thermostat fault typically shows up three ways:

  • No heat at all — contacts stuck open, or an over-temperature cut-out has tripped
  • Water far too hot, T&P valve venting — contacts stuck closed (potentially dangerous)
  • Erratic, inconsistent temperature

Before replacing the heating element, confirm the thermostat is switching and calling for heat. Equally, if you have already renewed the element and still have no heat, the thermostat is the likely culprit.

Fitting & replacement

Isolate power before removal. Replace the thermostat if temperature control becomes erratic, the water overheats, or the unit will not heat once the element is confirmed good. Part no: WH16.

Additional information

Brand

Raritan

Series

1700 Series

Type

Adjustable thermostat

Function

Electric element temperature control

Temperature Range

43–71°C

Factory Setting

49°C

Ignition Protected

Yes

Part No

WH16

Brand

Raritan