Description
The SPX Viking Power Vacuum is a 24 L/min (6.3 GPM) self-priming diaphragm pump with double check valves and a 5-metre self-priming capability — the highest suction lift in the Viking Power range. The double check-valve arrangement makes it compatible with vacuum toilet systems, where the pump must maintain a partial vacuum in the waste line. It can also be used for conventional grey water, black water, shower drain, and bilge applications. Pump head is rotatable 360°. Includes electric motor with manual hand-crank backup for emergency operation. ISO 8849 compliant for vessels above 12 m. 12V or 24V DC. 3-year warranty.
Configuration Options
| Configuration | Part No. | Flow (open) | Flow @ 0.1 bar | Amperage | Fuse |
|---|---|---|---|---|---|
| Viking Power Vacuum — 12V | 10-13373-07 | 24 L/min (6.3 GPM) | 22 L/min (5.8 GPM) | 3.3A | 12A |
| Viking Power Vacuum — 24V | 10-13373-08 | 24 L/min (6.3 GPM) | 22 L/min (5.8 GPM) | 1.6A | 6A |
Connection: 38 mm (1-1/2″) hose. Max lift: 5 m (16.4 ft). Max head: 4 m (13.1 ft). Pump head rotatable 360°. Includes manual hand-crank backup. Dimensions: 357 mm L × 271 mm W × 192 mm H. Weight: 5.1 kg.
Key Design Features
- Single-chamber self-priming diaphragm design — positive displacement diaphragm action provides consistent flow regardless of partial air entrainment; the pump can be run dry without damage and will self-prime after dry running without operator intervention
- Non-choke valves — double check valves with large flow passages handle un-shredded solids and fibrous material without blockage; in-line filters are not required, reducing maintenance and the risk of filter clogging causing pump failure
- High-impact nylon body — lightweight, corrosion-proof, and resistant to the grey water, black water, and bilge contamination encountered in the marine environment
- Ball-bearing supported transmission — longer bearing life compared to bushing-supported drives; reduces noise and vibration
- Built-in thermal motor protection — the DC motor includes integral thermal overload protection; the motor will shut down if it overheats and will restart automatically once cooled
- Replaceable diaphragm — in-place service — the reinforced nitrile rubber diaphragm is a service item; it can be replaced without removing the pump from the installation (the pump head is removable in-place), keeping maintenance downtime to a minimum
- KlickTite XL connectors — push-to-lock hose connectors (Viking Power 16) make installation and hose replacement tool-free; the connectors accept both 1″ and 3/4″ hose
- 12V and 24V DC — both voltages available; 24V models draw approximately half the current for the same output
- 3-year warranty — Johnson Pump Marine limited 3-year warranty
Vacuum Toilet System Compatibility
The Viking Power Vacuum’s double check-valve arrangement distinguishes it from the single-direction Viking Power 32: the double check valves allow the pump to both create and maintain a partial vacuum in the waste line while pumping — this is the operating mode required by vacuum marine toilet systems such as the Sealand and Dometic Vacuflush type. The pump draws waste from the vacuum toilet bowl through the low-pressure suction line while simultaneously discharging to the holding tank. The 5-metre self-priming capability ensures the pump can re-establish the vacuum after flushing without requiring manual priming. Contact Y3 Marine for advice on vacuum toilet system integration if required.
Applications
Vacuum toilet systems (primary differentiator), black water to holding tank, shower and basin drain, grey water transfer, bilge pumping on vessels above 12 m (ISO 8846 / 10133 / 8849 / EN55014). The 5m self-prime capability makes it suitable for installations where the pump must be mounted significantly above the waste source — for example, above the waterline in an accessible machinery space on a commercial vessel.
Installation Notes
- Mount the pump as close as practical to the source (sump, shower drain, or holding tank); keep the suction run short to maximise self-priming performance
- The pump can be mounted in any orientation — pump head can be rotated to align hose connections with the installation
- Use smooth-bore hose to minimise friction loss; corrugated hose reduces effective head significantly
- Wire directly to the battery via the rated fuse; fuse the circuit at the battery end of the run to comply with ABYC and ISO 10133 requirements
- Do not install in-line filters on the suction side — the non-choke valve design does not require them and a blocked filter on the suction will cause cavitation
- Connect the motor thermal protection lead (if present) to a panel warning indicator — do not bypass the thermal protection circuit
Electrical & Mounting (dealer notes)
The Viking Power Vacuum draws 3.3 A at 12 V (fuse 12 A) or 1.6 A at 24 V (fuse 6 A) at 0.1 bar; wire in 14 AWG (2.08 mm²) using the 1.0 m factory lead. Mount to the 139 × 139 mm bracket hole pattern (Ø16 mm). Double check valves on both suction and discharge ports prevent blockages at the internal flapper valve and suit vacuum-toilet waste lines.






