Description
The Spectra Cape Horn watermaker — the Cape Horn Extreme — is Spectra’s battle-proven offshore desalinator, chosen by Volvo Ocean Race and Clipper Round the World campaigns. Built for bluewater reliability, it makes 1,249 litres a day (15 GPH / 56 L/h) on 12 V or 24 V DC, with Clark Pump energy recovery holding consumption to about 16 watts per gallon — comfortable on batteries, solar or wind. Two control levels (330 analog, 330R Remote Manual) and a choice of Long or Short membrane suit anything from a race boat to a serious cruising yacht.
Why the Spectra Cape Horn watermaker is built for offshore
Offshore, simplicity is reliability. The Cape Horn runs on rugged analog mechanical controls and gauges — no software, no connectivity, nothing to fail a thousand miles from a dealer. Its Clark Pump pressure-intensifier recovers the brine’s energy back into the feed, cutting power to ~16 W/gal (4.2 W/L) and running whisper-quiet. Where the Ventura is the compact cruiser and the Newport the automated flagship, the Cape Horn is the one built to keep making water when everything else is wet, tired and far from help.
Dual redundant feed pumps — the bluewater feature
The Cape Horn’s defining trick is two Shurflo diaphragm feed pumps in parallel. Run one for maximum efficiency on passage; run both for maximum output when you need water fast; and if one ever fails, the other keeps you making water. Both are run-dry-safe. On a boat where the watermaker isn’t optional, that redundancy is the whole point.
330 or 330R — which to choose
- Cape Horn 330 — pure analog: mechanical controls and gauges, nothing to update or troubleshoot. The choice for hands-on operators and the harshest service.
- Cape Horn 330R — adds Spectra’s Remote Manual Controller for on/off and a timed fresh-water flush from a convenient mounting point anywhere aboard, with optional tank-full cut-off and Z±ION automated membrane protection (up to ~30 days storage). Convenience without surrendering offshore simplicity.
Long or Short membrane
Both models take a Long (40″ × 2.5″) membrane as standard, or a Short (20″ × 2.5″) membrane where space is tight — same output, more installation flexibility (the compact-vessel option carries a premium). Choose Long unless the install demands the shorter vessel.
Sizing it for your vessel
Work from real demand: water-conscious cruisers use 40–80 L per person per day, comfortable yacht use 100–200 L pp/day. At 1,249 L/day the Cape Horn covers a good-sized crew in a few hours’ run, leaving margin for cold water, fouling and guests — the tank buffers the rest. Output is quoted at 25 °C and falls ~3% per °C of cooler feed, so size for your coldest water.
Key features
- Clark Pump energy recovery — ~16 W/gal (4.2 W/L); runs on battery, solar or wind.
- 1,249 L/day (330 GPD) · 56 L/h (15 GPH).
- 12 V or 24 V DC — 19 A @12V / 10 A @24V.
- Dual redundant Shurflo diaphragm feed pumps — run one, run both, keep making water if one fails; run-dry safe.
- 330 analog controls · 330R Remote Manual Controller with timed flush — no software offshore.
- Long (40″) or Short (20″) 2.5″ spiral-wound TFC membrane; 99.2% salt rejection.
- 2.5″ × 10″ pleated 5-micron pre-filter.
- Wide operating range 2–37 °C (36–110 °F).
- Z±ION compatible; chlorine tolerance 0 PPM.
- Supplied with installation kit, handheld TDS tester and product sample valve.
Typical applications
- Offshore and ocean-racing campaigns (Volvo Ocean Race, Clipper) where failure isn’t an option.
- Bluewater and expedition cruising far from service.
- Sailing yachts running off batteries, solar or wind that value redundancy and low draw.
- Any vessel wanting a simple, rugged, high-output DC watermaker.
Installation & compatibility
- Dedicated forward-facing scoop intake (3/4″–1″) and seacock, low and clear of discharges, the engine raw-water intake and running gear.
- Sea strainer for easy clearing — the first check if flow drops.
- Brine discharge above the waterline, away from the intake; product to tank via the sample/diversion valve.
- Fresh-water flush after the vessel’s own treatment through a carbon filter — never raw chlorinated water to the membrane.
- 12 V or 24 V DC supply sized to draw; components mount to suit the space.
Looking after the membrane
The membrane is the costliest consumable and the easiest to ruin. Keep chlorine away (no raw dock water) and flush after every use — on the 330R the timed flush handles it. Change the pre-filters on pressure-drop. For lay-up beyond the flush window, preserve the membrane — Z±ION gives around 30-day protection without chemical pickling.
Genuine Cape Horn spares are in stock: Ventura & Cape Horn Service Kit, 5-micron pre-filter, the Clark Pump 10% and its seal & O-ring kit, the 2.5″ × 40″ RO membrane (or complete membrane kit), Z±ION protection, the salinity probe, the feed pump and the Remote Manual (REM) upgrade kit.
Specifications
| Spec | Cape Horn 330 | Cape Horn 330R |
|---|---|---|
| Output | 1,249 L/day · 56 L/h (15 GPH) | 1,249 L/day · 56 L/h (15 GPH) |
| Power (12 V / 24 V DC) | 19 A / 10 A | 19 A / 10 A |
| Efficiency | ~16 W/gal (4.2 W/L) | ~16 W/gal (4.2 W/L) |
| Energy recovery | Spectra Clark Pump | Spectra Clark Pump |
| Feed pumps | Dual redundant Shurflo diaphragm | Dual redundant Shurflo diaphragm |
| Controls | Analog mechanical | Remote Manual Controller (timed flush) |
| Membrane | Long 40″×2.5″ or Short 20″×2.5″ | Long 40″×2.5″ or Short 20″×2.5″ |
| Pre-filter | 2.5″×10″ pleated 5 µm | 2.5″×10″ pleated 5 µm |
| Salt rejection | 99.2% | 99.2% |
| Operating temperature | 2–37 °C (36–110 °F) | 2–37 °C (36–110 °F) |
| Weight | 38.5 kg (85 lb) | 43 kg (95 lb) |
| Chlorine tolerance | 0 PPM | 0 PPM |
Outputs quoted at 25 °C. Spectra Watermakers — Katadyn Group. Supplied, installed and serviced by Y3 Marine.







