Shurflo Pressure Switch

$32.23

Shurflo pressure cutout switch for Spectra feed pumps. Factory set to 125 PSI. Replace when the pump cycles on/off with each Clark Pump stroke.

Add to Quote
SKU: SW-EL-FP-PS Categories: , , Tags: ,

Description

Shurflo Pressure Switch — genuine replacement switch for the Spectra watermaker feed/boost pump. Supplied by Y3 Marine.

About the Shurflo Pressure Switch

Shurflo pressure cutout switch as fitted to Spectra Ventura, Cape Horn and Newport feed pumps. Located on the wet end of the pump head with two red wires connected. Shuts off the pump when pressure reaches the set point (factory: 125 PSI).

When to replace: The switch should never open during normal operation. If the pump cycles on/off with each Clark Pump stroke, the switch set point is too low. Adjust first (5/64″ Allen screw, clockwise to raise set point to 125 PSI). If adjustment does not resolve the cycling, or if the switch fails to close, replace it.

Temporary bypass: The Spectra manual permits jumping the two red switch wires to confirm diagnosis — the pump can be run safely with the switch bypassed; monitor feed pressure and do not exceed 110 PSI. Replace the switch as soon as a spare is available.

Fitment & ordering

The Shurflo Pressure Switch is a genuine Spectra part, supplied and supported by Y3 Marine for superyachts and commercial vessels. Browse our full Spectra Watermakers range for filters, membranes, pumps and genuine service parts. Contact Y3 Marine for fitment, cross-referencing and current stock. Reference: Spectra Watermakers.