Description
Sanimarin SN-Switch1 Rocker Switch (Comfort)
The Comfort-tier flush control for a Sanimarin macerating toilet — a robust rocker switch. You hold it to flush, so the user sets the water used per flush. The simplest, most economical way to run a Sanimarin.
When to fit it
- As the Comfort control on a new toilet (bowl + macerator supplied without a control).
- To replace a rocker that is intermittent, sticking or dead — the usual cause of “won’t flush” when the pump itself is fine.
Where it fits in the range
Sanimarin sells the toilet (bowl + macerator) and the control panel separately. Controls come in three tiers: Comfort (Rocker Switch — hold to flush), Premium (Push Button — pre-set ECO/NORMAL cycles) and Luxe (Electronic Keyboard). Match one to your Sanimarin toilet.
Fitting notes
- Isolate power to the toilet before working on the control or its wiring.
- Mount the panel at the head; run the cable back to the toilet’s control and connect per the Sanimarin wiring diagram.
- Use marine-grade crimps and heat-shrink, keep joints above the waterline, and feed from a fused supply.
- Test a flush cycle — confirm fill and macerate/discharge, then cut-off.
Dealer notes
- Comfort tier — the budget control; flush is hold-to-flush, so watch holding-tank capacity on long holds.
- If the toilet won’t flush, check the switch and its wiring first before suspecting the macerator.
- Step up to Premium or Luxe for metered ECO/NORMAL cycles that save tank capacity.
Genuine Sanimarin (Saniflo). Supplied by Y3 Marine.



