Racor P510MAM Fuel Polisher — 12/24 V (P50 Series)

$3,301.35

The Racor P510MAM is a 12/24 V multipass marine fuel polisher — a diesel tank-polishing system that circulates and cleans stored fuel at the source, stripping water, sludge and diesel bug so the engine always draws from a clean, dry tank. 272 LPH brushless pump, Aquabloc® II cartridge (R58065, 2/10/30 µm), UL 1105 metal bowl, stainless water sensor and control switch. Ideal for large tenders, chase boats and motoryachts up to ~80 ft, plus standby gensets and day-tank systems. Parker Racor.

Add to Quote
SKU: P510MAM Category:

Description

📦 Dispatch & Availability: Most items are available on back order and typically dispatch within 10 business days. Items not held in stock at the distributor can have a lead time of approximately 6–8 weeks from order.

The Racor P510MAM is Parker’s flagship marine fuel polisher — a 12/24 V multipass diesel polishing system that cleans fuel at its source: the tank. Where an engine-feed filter only cleans fuel on its way to the engine, the P510MAM is plumbed as a dedicated closed loop on the fuel bunker — continuously drawing, de-watering and filtering the stored fuel through Aquabloc® II media at up to 272 LPH (72 GPH), then returning it. Over repeated passes it strips water, sludge and diesel bug from the whole tank, so the engine draws clean, dry, ready-to-burn fuel every start.

Key Features

  • Multipass tank-polishing circuit — cleans the entire fuel bunker, not just the fuel on its way to the engine.
  • 272 LPH (72 GPH) maximum flow via an integral brushless electric pump — 12 V and 24 V compatible.
  • Aquabloc® II pleated cartridge — coalesces free water and blocks particulate; replacement element R58065 in 2 / 10 / 30 micron.
  • Removable, reusable metal collection bowl — UL 1105 fire-test certified for installation in the machinery space.
  • Stainless-steel water-in-fuel sensor as standard, with control switch and wiring harness included.
  • Aluminium and stainless-steel construction; 26 PSI (1.8 bar) maximum output pressure.
  • Bottom-loading cartridge design — element changes without disturbing the plumbing.
  • Compatible with ultra-low-sulfur diesel (#2 ULSD) and biodiesel blends to B20.
  • Operating range −40 °C to +121 °C; two M16 × 1.5 ORB ports (adapters available).

Why a marine fuel polisher earns its keep

Stored diesel does not keep. From the refinery through every transfer it picks up water, dirt and rust, and once it is in the tank it keeps gathering condensation — each night warm, moist air is drawn in and cools, dropping water to the bottom of the tank, exactly where the pickup sits. That water forms the interface where diesel bug (microbial growth) breeds, throwing black slime and acidic by-products that corrode tank walls and injectors. It all sits quietly until the day the engine is worked hard — then it lifts and chokes the onboard filters, often within minutes: the classic fuel-starvation failure at the worst possible moment. Modern low-sulfur and biodiesel fuels make it worse, holding more water and supporting more microbial growth than the high-sulfur diesel of old. A polisher removes the problem at the source, so the vessel’s primary and secondary filters last far longer and the engine always draws from a clean, dry tank.

How it works

Fuel is drawn from the tank into the module and through the pleated Aquabloc® II cartridge, which coalesces free water into the removable metal bowl and blocks particulate down to the chosen micron rating. The clean, dry fuel then passes through the integral 12/24 V brushless pump and returns to the tank. Because it runs off-line — independent of the engine — it never restricts fuel supply, so it can be run on a schedule, at rest or under way, cleaning the fuel over many passes. The stainless water-in-fuel sensor and control switch manage operation and flag when water collects.

Sizing & running it

Polishing is a multipass process: one pass will not clean a dirty tank, but repeated cycles will. Size the run time to turn the whole bunker over several times. At 272 LPH the P510MAM clears roughly 272 litres an hour — so a 1,000 L tank is one pass in about 3.7 hours and a 2,000 L tank in about 7.5 hours. Aim to cycle the full tank two to three times per session and run it on a timer for unattended, scheduled polishing. Fit a finer element than you would for engine supply — 10 micron for routine housekeeping, 2 micron for a deep clean-up of a neglected or suspect tank — because the module is not restricting the engine.

Where it fits

The P510MAM is sized for small-to-mid diesel installations — large tenders and chase boats (including superyacht tenders), sportfishers, and motoryachts up to around 80 ft — rather than large-vessel bunkers, which use dedicated high-capacity polishing skids.

  • Large tenders & chase boats — hard-run, refuelled from variable-quality bowsers and often left standing between jobs; polishing keeps the tank clean so the engine starts clean every time.
  • Motoryachts up to ~80 ft — where fuel can sit for weeks between passages and condensation and diesel bug build up.
  • Standby gensets — fuel must be clean and ready on demand; a scheduled polish keeps the day tank in good order.
  • Day-tank & fuel-transfer systems — polish the fuel on transfer from storage to service tanks.
  • Small commercial & workboats — where fuel-system reliability is operational-critical and downtime is costly.
  • Recovery after bunkering suspect fuel, or reviving a tank that has sat unused over a lay-up.

Installation & compatibility notes

  • Dedicated closed loop — plumb on the tank, separate from the engine supply. Draw from the lowest point / the end opposite the engine pickup (where water and sludge settle) and return to the far end to promote circulation and avoid short-cycling the same fuel.
  • Wiring — run the 12 V or 24 V pump through the supplied control switch; a timer or fuel-management controller allows unattended, scheduled polishing.
  • Helm alarm — pair with the Racor Water-in-Fuel Detection Kit for audible/visual warning when water collects.
  • Not an engine-room primary — run the P510MAM alongside a Racor Turbine primary/secondary on the engine feed. The polisher keeps the tank clean; the Turbine protects the engine.
  • Confirm 12 V vs 24 V on order. Supplied with brushless motor, wiring harness, control switch, metal bowl, water sensor and fittings. Replacement elements: R58065 (2 / 10 / 30 micron).

Specifications

Spec P510MAM
Max flow rate 272 LPH (72 GPH)
Pump 12 / 24 V DC brushless electric
Max output pressure 26 PSI (1.8 bar)
Ports 2 × M16 × 1.5 ORB (adapters available)
Filter media Aquabloc® II pleated cartridge
Replacement element R58065 — 2 / 10 / 30 micron (supplied 10 µm)
Collection bowl Removable metal — UL 1105 fire tested
Water sensor Stainless steel — standard
Construction Aluminium & stainless steel
Fuel compatibility #2 ULSD, biodiesel to B20
Operating temperature −40 °C to +121 °C
Supplied with Motor, harness, control switch, metal bowl, WIF sensor, fittings

Parker Racor genuine.

Additional information

Type

Fuel polishing system — P50 Series RFCM (Racor Fuel Conditioning Module), off-line multipass

Pump

12 / 24 V DC brushless electric — 272 LPH (72 GPH)

Ports

2 × M16 × 1.5 ORB (adapters available)

Media

Aquabloc® II pleated cartridge — ULSD & biodiesel to B20 compatible

Bowl

Removable, reusable metal collection bowl — UL 1105 fire tested

Water Sensor

Stainless water-in-fuel sensor + control switch (standard)

Operating Temp

-40°C to +121°C

Elements

R58065 — 2 / 10 / 30 micron (supplied 10 µm)

Supplied With

Brushless motor, electrical harness, control switch, metal bowl, WIF sensor and fittings

Brand

Parker Racor

Max Pressure

26 PSI (1.8 bar) output

Construction

Aluminium & stainless steel

You may also like…