Quick Nautic Boiler Electric Element

$221.73

Genuine Quick replacement electric heating element for Nautic Boiler (and Sigmar) water heaters, complete with anode and gasket. Choose 500W, 800W or 1200W at 220V, or 1200W at 120V. Standard element — see Anti-Flare Protection for the ignition-protected version.

Add to Quote
SKU: N/A Categories: ,

Description

📦 Dispatch & Availability: This item is available on back order. Please allow up to 10 business days to dispatch from the date of order.

Genuine Quick water heater element — a replacement electric heating element for the Nautic Boiler range (also fits Sigmar models), supplied complete with anode and gasket. Choose the voltage and wattage to match your electrical system and boiler. This is the standard element — for installation in spaces where flammable vapours may be present, use the ignition-protected Anti-Flare Protection version instead.

What the Quick water heater element does & when to replace

The element heats the tank on shore power or generator. Replace it if the unit stops heating, the element reads open-circuit (no continuity), or it is heavily scaled. Each element is supplied with a fresh anode and gasket, so you renew the wear items in one go.

Before you replace it — check the thermostat

A no-heat fault is not always a failed element. A faulty bi-thermostat gives the same ‘no hot water’ symptom. Before condemning the element, confirm the thermostat is calling for heat and passing voltage, and test the element itself for continuity.

Choosing your element — voltage & wattage

Match the voltage to your system (220–240V for AU mains/generator; 120V for US-spec / 60Hz). Match the wattage to your supply — higher wattage reheats faster but draws more current:

  • 500W @ 220V ≈ 2.3A
  • 800W @ 220V ≈ 3.6A
  • 1200W @ 220V ≈ 5.5A
  • 1200W @ 120V ≈ 10A

Run any element from a correctly sized, dedicated circuit breaker and cable, supplied by a generator or inverter able to carry the load.

Need ignition protection?

On vessels with petrol engines, LPG or any space where flammable vapour could collect, fit the ignition-protected Anti-Flare Protection element (ISO 8846) rather than this standard element.

Avoiding premature failure — scale & dry-firing

Scale insulates the element and makes it overheat; dry-firing (energising with the tank not full) destroys it in seconds. Always fill the tank and purge air before switching on.

Select your rating

  • 500W 220V → QFVSLRSB05220A00
  • 800W 220V → QFVSLRSB0822SA00
  • 1200W 220V → QFVSLRSB12220A00
  • 1200W 120V → QFVSLRSB12110A00

Fits across the range

Compatible with the Quick Nautic Boiler B3, BX (including BX 16L) and BXS water heaters, and Sigmar models — select the rating to suit your boiler and electrical system.

Fitting

Installation involves electrical work — the connection must be made by a competent, appropriately qualified person: a licensed electrician, or a suitably qualified marine engineer working within the scope of their certificate. Isolate power and drain the tank before removal (the element removal spanner is the correct tool); fit the new gasket and refill and purge air before energising.

Additional information

Voltage & Wattage

500W 220V, 800W 220V, 1200W 220V, 1200W 120V

Brand

Quick

Type

Electric heating element (standard)

Supplied With

Anode and gasket

Fits

Quick Nautic Boiler B3, BX (incl. 16L) & BXS; also Sigmar

Ignition Protection

Standard — see Anti-Flare Protection for ISO 8846 version