Pump/Motor Assembly – High Pressure (250–500 GPD)

OEM FCI complete high pressure pump/motor assembly for Aquamiser+ 250 GPD (A216+) and 500 GPD (A516+) models. 316 stainless steel triplex pump head with dual-voltage 1.5HP motor — one unit suits both 110 VAC and 220 VAC installations. Special order.

Add to Quote
SKU: 93-0120 Category:

Description

The FCI High Pressure Pump/Motor Assembly (45-1657) is the complete OEM HP drive unit for the Aquamiser+ 250 GPD (A216+) and 500 GPD (A516+) models. It comprises the 316 stainless steel triplex pump head coupled to a dual-voltage 1.5HP motor that operates on either 110 VAC or 220 VAC without modification — one assembly suits both voltages. It is the component responsible for pressurising seawater delivered by the LP feed pump to RO operating pressure. Connections at the pump head are a 3/8″ JIC SS 90° elbow at discharge and a 3/8″ MPT × 1/2″ tube PE elbow at inlet. The 600–1800 GPD Aquamiser+ models use the larger 2.5HP assembly (45-4032). HP pump oil changes are required at 50 hours initial service and every 500 hours thereafter. Special order through Y3 Marine.

Key Specifications

  • OEM FCI complete HP pump/motor assembly — 316SS triplex pump head + dual-voltage 1.5HP motor
  • Motor: 1.5HP, 110/220 VAC, 50/60Hz, 1PH — one unit suits both voltages
  • Suits Aquamiser+ 250 GPD (A216+) and 500 GPD (A516+)
  • Discharge connection: 3/8″ JIC SS 90° elbow
  • Inlet connection: 3/8″ MPT × 1/2″ tube PE elbow
  • Oil change intervals: 50 hours (initial), then every 500 hours
  • 600–1800 GPD models use 45-4032

Compatible With

  • Aquamiser+ framed — 250 GPD (A216+) and 500 GPD (A516+)
  • Aquamiser+ modular — 250 GPD and 500 GPD configurations

⚠️ Special Order — This part is not stocked in Sydney. Lead times apply. Contact Y3 Marine to confirm availability and arrange supply.

Brand

FCI Watermakers