Pump Head – High Pressure – Aqualite

OEM FCI Aqualite triplex plunger pump head — the hydraulic end used across all Aqualite HP pump/motor assemblies regardless of voltage. Ceramic plungers, 316 SS manifolds, ISO-68 mineral oil crankcase. 690–8,274 kPa (100–1,200 PSI) discharge range. Order this pump head alone when the motor is serviceable but the hydraulic end requires replacement. Special order.

Add to Quote
SKU: 45-4882 Category:

Description

The FCI Aqualite Pump Head (45-4882) is the OEM triplex plunger pump that forms the hydraulic end of all Aqualite HP pump/motor assemblies (93-4060, 93-8439, 93-8440, 93-8441). It is a direct-coupled, crankshaft-driven triplex pump with three ceramic plungers (M18 × 18), 316 SS inlet and discharge manifolds, and an oil-lubricated aluminium crankcase. It runs at 1,450 rpm on 50 Hz power, delivering 3.2 L/min (0.84 GPM) across a discharge pressure range of 690–8,274 kPa (100–1,200 PSI). Inlet and discharge ports are 3/8″ NPT(F); the bypass return port is 1/4″ NPT(F). Crankcase oil capacity is 0.33 L (ISO-68 hydraulic mineral oil). Service kits are available separately for seals (NBR, FPM or EPDM), valves, and inlet valves — the pump head can often be rebuilt in place rather than replaced as a complete assembly. Order the pump head alone when the motor is serviceable and only the hydraulic end requires attention. Special order through Y3 Marine.

Key Specifications

  • Pump type: triplex crankshaft-driven plunger pump, direct-coupled to motor
  • Plungers: ceramic, M18 × 18, × 3
  • Manifolds: 316 SS inlet and discharge
  • Discharge pressure range: 690–8,274 kPa (100–1,200 PSI)
  • Inlet pressure range: flooded to 414 kPa (60 PSI)
  • Shaft diameter: 15.9 mm (5/8″) — direct couple to motor
  • Speed: 1,450 rpm (50 Hz) / 1,725 rpm (60 Hz)
  • Flow: 3.2 L/min (50 Hz) / 3.8 L/min (60 Hz)
  • Max liquid temperature: 71°C (160°F)
  • Crankcase oil capacity: 0.33 L — ISO-68 hydraulic mineral oil
  • Ports: 3/8″ NPT(F) inlet and discharge, 1/4″ NPT(F) bypass return
  • Weight: 4 kg — dimensions: 173 × 221 × 133 mm

Typical Superyacht Applications

  • Pump head replacement on Aqualite watermakers where the motor is serviceable but the hydraulic end has worn valves, failed seals, or a damaged crankcase
  • Component-level rebuild using OEM seal kits or valve kits rather than replacing the full pump/motor assembly
  • Oil change and valve service during scheduled HP pump maintenance

Installation & Compatibility Notes

  • Compatible with: Aqualite (framed and modular) — all voltage variants (93-4060, 93-8439, 93-8440, 93-8441)
  • Pump MUST rotate counter-clockwise only — reverse rotation will cause immediate damage
  • Crankcase oil: ISO-68 hydraulic mineral oil — change at first 50 hours, then every 500 hours
  • Service kits available separately: seal kit (NBR/FPM/EPDM), valve kit, inlet valve kit — contact Y3 Marine
  • Torque all fasteners to FCI specification — refer to HP pump maintenance section of the Aqualite user manual
  • Pump head only — motor not included; for a complete assembly see 93-4060 / 93-8439 / 93-8440 / 93-8441

⚠️ Special Order — This part is not stocked in Sydney. Lead times apply. Contact Y3 Marine to confirm availability and arrange supply.