Cartridge – Pre-filter 5 Micron Commercial

$185.74

Genuine FCI OEM commercial 5 micron pre-filter cartridge for the Aquamiser+, Max Q+, Atlas+, and Neptune+. Larger-format second-stage fine sediment removal protecting the high-pressure pump and RO membrane. Replace every 3–6 months. Stocked in Sydney by Y3 Marine, Australia’s authorised FCI dealer.

15 in stock

Add to Quote

Description

The FCI Commercial 5 Micron Pre-Filter Cartridge (SKU 20-2261) is the genuine OEM fine sediment cartridge for FCI’s commercial-grade watermaker range. Compatible with the Aquamiser+, Max Q+, Atlas+, and Neptune+, this larger-format cartridge provides second-stage fine particulate removal from the seawater feed immediately upstream of the high-pressure pump and RO membrane. Built for the higher flow rates of commercial superyacht watermakers, the commercial-format housing delivers greater dirt-holding capacity and longer service intervals than the standard cartridge — critical for vessels with high daily freshwater demand. Y3 Marine stocks genuine FCI cartridges in Sydney as Australia’s authorised FCI dealer.

Key Features

  • Genuine FCI OEM replacement — SKU 20-2261, commercial-format sizing for high-capacity pre-filter housings
  • 5 micron filtration rating — fine particulate removal immediately upstream of the high-pressure pump and RO membrane
  • Commercial-format cartridge — higher flow capacity and greater dirt-holding capacity than the standard 5 micron
  • Compatible with FCI Aquamiser+, Max Q+, Atlas+, and Neptune+ watermakers
  • Protects high-pressure pump internals and RO membrane from fine sediment damage
  • Replacement interval: 3–6 months, adjusted for operating conditions and inlet water quality
  • Stocked in Sydney for efficient dispatch by Y3 Marine, Australia’s authorised FCI dealer

Typical Superyacht Applications

  • Second-stage seawater pre-filtration on FCI commercial watermakers (Aquamiser+, Max Q+, Atlas+, Neptune+)
  • High-volume freshwater production on charter and liveaboard superyachts with continuous watermaker operation
  • Critical membrane and pump protection in all seawater inlet conditions

Installation & Compatibility Notes

  • Compatible with: FCI Aquamiser+, Max Q+, Atlas+, Neptune+
  • Installs in the commercial-format pre-filter housing, downstream of the coarse filter
  • Replace when inlet pressure rises 3–5 PSI above clean baseline, or on calendar interval — whichever comes first
  • Always replace alongside the coarse pre-filter cartridge for a complete pre-filtration service

Brand

FCI Watermakers