Description
The FCI Supplemental Pre-Filter Assembly – Bulkhead Mount (SKU 93-7465) is an optional two-stage pre-filtration unit designed to extend the service life of the primary pre-filter on the FCI DTS+Mobile watermaker. The DTS+Mobile draws from marina water supplies which can carry heavy sediment and chlorine loads — this assembly installs a 5-micron sediment stage and an activated carbon (GAC) stage upstream of the primary filter, stripping out the coarse material and chemical contaminants before they reach the primary filter cartridge. The result is dramatically extended primary filter life and improved protection for the high-pressure pump and RO membrane. The assembly is bulkhead mounted for a permanent installation, with filter housings accessible from the front and 38 mm clearance required below for cartridge changes. A standing/portable version is available separately (SKU 93-7466). This is a special order item — contact Y3 Marine for pricing and lead time.
Key Features
- Two-stage supplemental filtration: Stage 1 — 5-micron sediment filter (SKU 20-0021); Stage 2 — activated carbon/GAC filter (SKU 20-0026)
- Permanently bulkhead-mounted using 8× 5/16″ screws and washers into a solid bulkhead surface
- Extends primary pre-filter (SKU 20-7111) service life by removing sediment and chlorine/bromine load before it reaches the primary filter
- Dry weight: 8.2 kg; dimensions: 478 × 353 × 204 mm — suitable for installation in a dock box, lazarette, or below-deck compartment adjacent to the DTS+Mobile
- Allow a minimum of 38 mm clearance below the assembly for filter cartridge changes
- Replacement sediment cartridge: SKU 20-0021 | Replacement carbon cartridge: SKU 20-0026
- DTS+Mobile specific — not compatible with DTS+Solo or other FCI models
- ⚠️ Special Order — not stocked in Sydney. Contact Y3 Marine for pricing and availability.
Typical Superyacht Applications
- Permanent supplemental pre-filtration installation for a DTS+Mobile operating regularly in ports with high-sediment or high-chlorine municipal water supplies
- Reducing filter consumable costs on a yacht that relies heavily on dockside water production
Installation & Compatibility Notes
- Compatible with: FCI DTS+Mobile only
- Mount to a solid bulkhead using 8× 5/16″ screws and flat washers (supplied) — do not mount to thin panel or unsupported surface
- Ensure 38 mm (1½”) clearance below the housing base for filter cartridge removal
- Connect upstream of the DTS+Mobile primary pre-filter using the supplied 3/4″ hose adaptors
- Refer to the DTS+Mobile User Manual (Supplemental Pre-Filter section) for plumbing schematic and installation instructions






