Description
Proven Megayacht Watermaker for Vessels 150–300 ft
The FCI Neptune+ is the watermaker Y3 Marine specifies on vessels where running out of fresh water simply isn’t an option. Built around a 10 HP direct-drive marine gearbox — no belts to adjust, align or replace — and driven by the same V4 bridge-certified control platform as the Atlas+, it’s engineered for the continuous duty cycles that megayachts, large charter vessels and commercial craft demand. Output runs from 536.3 to 1,577.3 L/h (3,400 to 10,000 GPD) across three configurations and up to seven production sizes.
As an authorised FCI Watermakers dealer in Australia, Y3 Marine supplies, installs and services the Neptune+ to FCI’s commissioning specification — and carries the consumables your scheduled service intervals require.
Neptune+ Specifications
- Output: 536.3–1,577.3 L/h (3,400–10,000 GPD)
- Motor: 10 HP TEFC continuous-duty, 316SS shaft
- Power draw: 8.20 kW
- Drive: Marine-grade direct drive gearbox (no belts)
- High-pressure pump: Continuous-duty 316SS with pulsation dampener
- Feed pump: 316SS closed impeller (50% more pressure efficiency than standard)
- Pre-filter: 80 sq ft commercial pleated cartridge with pressure monitoring
- Voltage: 208–240 / 380 / 480 VAC, 1 or 3 phase, 50/60 Hz
- Control: V4 7" HMI/PLC touch screen (bridge-certified: ABS, GL, Lloyd’s, DNV)
- Enclosure: NEMA 4X
- Design point: 25°C seawater, 32,000 TDS, 825 PSI
Production by Model
- N(H/M/V)34263+: 536.3 L/h (3,400 GPD)
- N(H/M/V)46263+: 725.5 L/h (4,600 GPD)
- N(H/M/V)58263+: 914.8 L/h (5,800 GPD)
- NV72263+: 1,135.6 L/h (7,200 GPD) — Vertical only
- N(H/M/V)80263+: 1,261.8 L/h (8,000 GPD)
- NV90263+: 1,419.5 L/h (9,000 GPD) — Vertical only
- N(H/M/V)100263+: 1,577.3 L/h (10,000 GPD)
Three Configurations
- Neptune+ Horizontal — standard skid build, the proven megayacht workhorse. 5 production sizes (3,400–10,000 GPD). Prefix: NH
- Neptune+ Modular — split components for engine rooms with awkward geometry. 5 production sizes (3,400–10,000 GPD). Prefix: NM
- Neptune+ Vertical — tall-narrow footprint where horizontal isn’t possible. 7 production sizes (3,400–10,000 GPD) including the 7,200 and 9,000 GPD models exclusive to this configuration. Prefix: NV
Automated Pressure Control (APC)
All Neptune+ models are available with APC — Automated Pressure Control — which continuously monitors feed water conditions and adjusts HP pressure automatically to maintain consistent output in variable seawater quality. Specified as standard on any vessel where the crew shouldn’t need to monitor or adjust the watermaker underway.
Best Vessels for the Neptune+
The Neptune+ is the right specification for megayachts 150–300 ft with full guest and crew complement, large charter vessels and expedition yachts running maximum daily output, commercial craft where continuous production is critical, and shore-based and island-home installations requiring reliable high-volume fresh water.
For superyachts in the 100–150 ft range the Atlas+ (221–568 L/h) is the right fit.
Authorised FCI Dealer — Supply and Install in Australia
Every Neptune+ supplied through Y3 Marine is engineered into the vessel’s electrical and plumbing fit-out, commissioned on board, and backed by our Sydney-based engineering and service team. We carry FCI membranes and consumables to keep scheduled service intervals on track. Contact us with your vessel details and target output to discuss sizing and configuration.








