Description
The Marco UP1 flexible-impeller pumps are self-priming electric pumps for transferring water, grey water and low-viscosity fluids. The rubber (nitrile) impeller delivers a high flow rate and passes the small impurities found in wastewater, so they suit bilge, shower-drain, deck-wash, ballast and general fluid-transfer duty. Nickel-plated brass body, stainless-steel shaft, FKM seals and NBR O-rings; fitted with a waterproof cable gland and an internal brush holder with EMI filter. Compliant with ISO 8846 (ignition protection) and ISO 8849.
Specifications
| Spec | Value |
|---|---|
| Type | Self-priming flexible-impeller pump |
| Max flow | 35 L/min (9.2 GPM) |
| Max pressure | 1.2 bar (17.4 psi) |
| Self-priming | ~1.5 m |
| Impeller | Nitrile rubber (serviceable) |
| Body | Nickel-plated brass · stainless-steel shaft |
| Seals | FKM seals · NBR O-rings |
| Ports | 3⁄8″ BSPP · 20 mm hose |
| Standards | ISO 8846 & ISO 8849 |
| Weight | ~1.8 kg |
Dealer notes
- Never run it dry. The flexible impeller relies on the pumped liquid to lubricate and cool it — prime it before starting and stop the moment flow breaks. Keep a spare impeller aboard.
- Self-priming to ~1.5 m — mount it above the bilge and let it draw the water up.
- Passes small solids — the rubber impeller shrugs off the grit and debris in grey and waste water that would clog a rigid-vane pump.
- Fuse and wire per the plate; the internal EMI filter keeps it from interfering with electronics.
Genuine Marco. Supplied by Y3 Marine.





