Johnson WPS/WD Micro Switch

$18.50

Genuine Johnson WPS/WD pump micro switch (09-60302) — the internal pressure switch that starts and stops the Aqua Jet WPS/WD water-pressure pump on demand.

Johnson Pump Marine by SPX FLOW. Supplied by Y3 Marine.

Available on back-order

Add to Quote

Description

Genuine Johnson WPS / WD pump micro switch (09-60302) — the internal switch that senses system pressure and starts / stops the Aqua Jet WPS and WD water-pressure pumps on demand. When it tires, the pump won’t cut in or won’t shut off — this is the part that restores proper cycling.

Dealer notes

  • Symptoms of a failed switch — pump won’t start when a tap opens, won’t stop when it closes, or cycles erratically.
  • Check the accumulator too — short-cycling is often a lost accumulator charge rather than the switch.
  • Genuine part — matched to the WPS/WD pressure-switch housing; confirm your pump model.

Fitting & service guide — pressure / micro switch

  1. De-power the pump before touching the wiring.
  2. Fit the switch to the pump head and remake the connections with marine crimps and heat-shrink.
  3. Run the system and confirm the pump starts on demand and cuts off at pressure without short-cycling.
  4. If it still short-cycles, check the accumulator pre-charge and for small downstream leaks before condemning the switch.

Johnson Pump Marine by SPX FLOW. Supplied by Y3 Marine.

Additional information

Type

Pressure-switch micro switch

Fits

Johnson WPS / WD pumps

Brand

Johnson Pump Marine (SPX FLOW)