Johnson WPS/WD Pressure Switch

Price range: $115.01 through $169.00

Genuine Johnson WPS/WD pressure switch — the pressure-sensing switch that cycles the Aqua Jet WPS/WD water-pressure pump: starts it when a tap drops the pressure, stops it when the system is up to pressure.

Johnson Pump Marine by SPX FLOW. Supplied by Y3 Marine.

Add to Quote

Description

Genuine Johnson WPS / WD pressure switch — the pressure-sensing switch that runs the Aqua Jet WPS and WD water-pressure pumps. A failed switch is the usual reason a pressure pump won’t start, or won’t shut off.

Dealer notes

  • Match the cut-in / cut-out to your pump — select the switch to suit the WPS or WD model.
  • Rule out the accumulator first — constant short-cycling is more often a lost air charge than a bad switch.
  • Genuine assembly — seals and calibration matched to the pump; confirm your model.

Fitting & service guide — pressure / micro switch

  1. De-power the pump before touching the wiring.
  2. Fit the switch to the pump head and remake the connections with marine crimps and heat-shrink.
  3. Run the system and confirm the pump starts on demand and cuts off at pressure without short-cycling.
  4. If it still short-cycles, check the accumulator pre-charge and for small downstream leaks before condemning the switch.

Johnson Pump Marine by SPX FLOW. Supplied by Y3 Marine.

Additional information

Configuration

40 psi (WPS), 73 psi (WD)

Type

Pump pressure switch (replacement)

Settings

40 psi (WPS) · 73 psi (WD)

Fits

Johnson WPS / WD pumps

Brand

Johnson Pump Marine (SPX FLOW)