Description
The Johnson Aqua Jet WPS is the workhorse of a boat’s fresh-water system — a five-chamber diaphragm pump that delivers automatic, on-demand water to taps, showers and appliances. The integral pressure switch starts the pump the moment a tap opens and shuts it off at 41 psi (2.8 bar), so there is no manual switching. Self-priming and dry-run tolerant, and engineered for low noise and low pulsation even at reduced flow.
Performance
| Model | Flow | Cut-off | Voltage |
|---|---|---|---|
| WPS 2.9 | 11 L/min (2.9 GPM) | 41 psi (2.8 bar) | 12 / 24 V |
| WPS 3.5 | 13 L/min (3.5 GPM) | 41 psi | 12 / 24 V |
| WPS 4.0 | 15 L/min (4.0 GPM) | 41 psi | 12 / 24 V |
| WPS 5.2 | 20 L/min (5.2 GPM) | 41 psi | 12 / 24 V |
Wetted materials: Santoprene diaphragm, EPDM valves, PP/PPA body — chemical- and UV-resistant.
Sizing the pump
Match the flow to the number of outlets you expect to run at once: 2.9–3.5 GPM suits one to two outlets; 4.0–5.2 GPM supplies several taps and a shower without noticeable pressure drop. Size up rather than down — a pump running nearer its rating cycles less and lasts longer.
Choosing between the three Aqua Jet pumps
Y3 Marine stocks three Aqua Jet demand pumps for different jobs — all self-priming, on-demand pumps with a built-in pressure switch, but suited to very different systems:
- Aqua Jet (compact — 3.8 L/min, 35 psi) — the entry pump for a single tap or a very small system on a tender or day boat. Lowest flow, pressure, current draw and cost.
- Aqua Jet WPS (2.9–5.2 GPM / 11–20 L/min, 41 psi) — the standard multi-outlet fresh-water pump. Pick the flow rating to suit the number of outlets (galley, head, shower); pair with an accumulator to smooth flow and cut cycling.
- Aqua Jet Flow Master 5.0 (variable flow to 5 GPM / 19 L/min, 51 psi) — the premium pump: electronic variable-speed control holds constant pressure and smooth flow however many taps are open, runs without an accumulator, and is the quietest of the three.
In short: single outlet → Aqua Jet; standard system → WPS (sized to outlets); large system or premium feel → Flow Master.
Installation & dealer notes
- Inlet strainer — always fit one. Grit reaching the diaphragm valves is the number-one cause of weak pressure and leaks.
- Accumulator tank. Fit on the pressure side to smooth pulsation, steady tap flow and cut pump cycling — quieter, with longer pump life.
- Flexible connections. Plumb a short length of flexible hose at inlet and outlet so the pump doesn’t transmit noise and vibration into the hull.
- Don’t starve the inlet. Keep the suction line short, full-bore and air-tight — a restricted or leaky inlet causes loss of prime and pulsing.
- Wiring. Size the cable for the run and fuse per the data sheet; these are automatic pumps — leave them powered and they run on demand.
Common faults
- Short-cycling / won’t stop: flat or missing accumulator, worn pressure switch, or a small leak downstream.
- Loss of prime / pulsing: air leak on the suction side or a blocked inlet strainer.
Key features
- Five-chamber diaphragm pump — automatic on-demand delivery via built-in pressure switch
- 2.9 / 3.5 / 4.0 / 5.2 GPM (11–20 L/min), 12 & 24 V DC, 41 psi cut-off
- Self-priming; dry-run tolerant; low noise and pulsation
- Santoprene diaphragm, EPDM valves, PP/PPA body
- Pair with an accumulator and an inlet strainer for best results
Johnson Pump Marine by SPX FLOW. Supplied by Y3 Marine.





