Description
Genuine Johnson replacement motor cartridge for the cartridge submersible bilge pumps — the complete motor / impeller unit that snaps into the strainer base that stays mounted and plumbed. When the motor tires or a hard season catches up with it, you replace just the cartridge in seconds: no unbolting the base, no disturbing the discharge hose or wiring.
Which cartridge
- 500 GPH (184124) — 500 GPH cartridge pumps (e.g. Aqua Void 500)
- 750 GPH (184126) — 750 GPH pumps (e.g. Low Boy 750)
- 1000 / 1250 GPH (184128) — 1000 & 1250 GPH pumps
Dealer notes
- Base stays put. The strainer base, hose and wiring stay in the boat — only the cartridge lifts out, so a mid-season failure is a tool-free swap.
- Match the GPH to your pump — the cartridge is sized to the base it clips into.
- Keep the strainer clear. A clogged basket works the motor harder and shortens cartridge life; rinse it regularly.
- Carry a spare — on a boat that relies on its bilge pump, the cartridge is the part that eventually wears.
Fitting & service guide — motor cartridge
- De-power the pump.
- Twist the old cartridge out of the strainer base — the base, hose and wiring stay put.
- Drop the new cartridge in and lock it; check it seats fully and the seal is clean.
- Re-power and test for full flow and no leaks. Keep a spare aboard — it turns a dead pump into a two-minute fix.
Johnson Pump Marine by SPX FLOW. Supplied by Y3 Marine.





