Description
Jabsco Par-Max & Pressure Pump Service Kits
Genuine service and repair kits for the Jabsco Par-Max and pressure diaphragm pump range — the Par-Max freshwater pressure pumps, the 31705 pump and 3-diaphragm 40 psi units. Valves and the diaphragm are the wear items in a pressure pump; choose the full service kit, or the valve, diaphragm, upper/lower housing or check-valve kit for a targeted repair.
What’s in a service kit
A genuine Jabsco service kit packs the wearing parts for one pump into a single box — typically the impeller or diaphragm, valves, seals, gaskets and O-rings — so you can refresh the whole wet end in one go. Larger pumps also offer separate housing, valve and seal kits for a partial repair.
When does it need servicing?
Service a diaphragm pressure pump when you see:
- Won’t build or hold pressure, or cycles on and off at rest — worn valves or a leaking diaphragm.
- Weak or heavily pulsing flow — perished valves or a tired diaphragm.
- Leaks from the pump head.
- Pressure switch not cutting in or out at the right pressure.
Servicing a diaphragm pump
- Isolate — switch off, pull the fuse, relieve system pressure and close the supply.
- Split the pump head — record orientation; lift out the valve assemblies and diaphragm.
- Renew the valves (and the joker valve where fitted) and the diaphragm; clean the seats.
- Reassemble — valves the correct way round, diaphragm seated, head screws tightened evenly in a diagonal pattern.
- Test — repower, confirm it builds pressure, cuts out at the switch setting and holds without cycling.
Dealer notes
- Match the kit to the exact pump — Par-Max 1, Par-Max, 31705 or the 3-diaphragm 40 psi unit — using the selector.
- A pump that cycles at rest usually needs the valve kit; weak pressure usually means the diaphragm.
- Fit a strainer upstream — grit in a valve seat is a common cause of a pump that won’t hold pressure.





