Jabsco Par-Max 4 Bilge / Livewell / Multi-Purpose Pump 24V

$509.00

Jabsco Par-Max 4 multi-purpose pump — a high-flow diaphragm pump for bilge, livewell, washdown and transfer duty. 24V.

Genuine Jabsco (Xylem). Supplied by Y3 Marine.

Add to Quote
SKU: N/A Category:

Description

Jabsco Par-Max 4 Pump — Bilge, Livewell & Multi-Purpose

The Jabsco Par-Max 4 (Bilge / Livewell / Multi-Purpose) is a high-flow four-chamber diaphragm pump built to move water, not pressurise it — 4.3 GPM (16.3 L/min) of self-priming, run-dry-tolerant flow through ¾” ports, with a Pumpgard inlet strainer included. It is the utility work-horse for bilge dewatering, live-well fill and recirculation, deck and anchor washdown, and general water transfer. Remote-mount it in a dry spot above the bilge and it will pull water up to ~3 m and keep running even if it loses prime. Available in 12 V and 24 V — select below.

Specifications

Spec Value
Flow 4.3 GPM (16.3 L/min)
Ports ¾” (19 mm)
Voltage 12 V or 24 V DC — select above
Priming Self-priming to ~3 m (10 ft); runs dry without damage
Strainer Pumpgard inline strainer included
Standards USCG 183.410 · ISO 8846 (ignition-protected)
Type Four-chamber diaphragm — passes small debris

Why choose the Par-Max 4 over the other Par-Max pumps?

Both this pump and the Par-Max pressure pumps wear the “Par-Max” name, but they do opposite jobs — pick by what you need the pump to do:

  • Par-Max 4 Bilge / Livewell / Multi-Purpose (this pump) — a high-flow pump for moving water. No pressure switch, no accumulator: it runs when you switch it on and shifts volume. Choose it for bilge pump-out, live-well fill/recirculation, deck & anchor washdown and bulk transfer.
  • Par-Max automatic pressure pumps (1 PLUS → 6.0 HD) — fresh-water pressure pumps with a built-in pressure switch that start on demand when a tap opens and hold system pressure. Sized by the number of outlets. Choose one of these to pressurise galley / head / shower outlets — not this pump.

And versus a flexible-impeller Water-Puppy / Utility-Puppy: the Par-Max 4 is a diaphragm pump — it tolerates running dry, passes small debris and has no impeller to shear, so it suits intermittent, dry-prone duty. Choose a flexible-impeller Puppy instead where you want continuous, higher-flow raw-water pumping from a flooded suction.

Typical applications

  • Bilge dewatering (remote-mounted, dry location above the bilge)
  • Live-well fill and recirculation
  • Deck, anchor and bait washdown
  • General fresh- or salt-water transfer

Installation & dealer notes

  • Fit the Pumpgard strainer on the inlet (supplied) — debris in the diaphragm valves is the main cause of weak flow.
  • Remote dry mount. Mount above the bilge in a dry, ventilated spot; the pump self-primes to ~3 m so it needn’t sit in the water.
  • Run-dry tolerant — safe to pump a bilge or well right down.
  • Wiring. Match the pump voltage to the house bank; fuse and size the cable per the data sheet, and use flexible hose tails to keep noise out of the hull.

Common faults

  • Weak flow: blocked Pumpgard strainer or debris in the diaphragm valves.
  • Loss of prime: air leak on the suction side or a kinked / restricted inlet.

Key features

  • High-flow multi-purpose diaphragm pump — 4.3 GPM (16.3 L/min)
  • Self-priming to ~3 m; runs dry without damage
  • Pumpgard inlet strainer included; ¾” ports
  • Ignition-protected — USCG 183.410 / ISO 8846
  • 12 V and 24 V; bilge · live-well · washdown · transfer

Genuine Jabsco (Xylem). Supplied by Y3 Marine.

Additional information

Voltage

12V, 24V

Type

Multi-purpose diaphragm pump — high flow

Series

Par-Max 4 (Bilge / Livewell / Washdown)

Flow

4.3 GPM (16.3 L/min)

Ports

¾" (19 mm)

Priming

Self-priming to ~3 m · runs dry

Strainer

Pumpgard inline strainer included

Standards

USCG 183.410 · ISO 8846

Duty

Bilge · livewell · washdown · transfer

Brand

Jabsco (Xylem)