Isotherm® Water Heater Overheat Thermostat (Safety Cut-out)

$81.35

Genuine Isotherm (Isotemp) overheat (high-limit) safety thermostat for Basic and Slim marine water heaters. Cuts power to the element if it overheats. The 240V connection is electrical work — for a licensed electrician or a suitably qualified marine engineer. Part SEA00042LA.

1 in stock (can be backordered)

Add to Quote
SKU: SEA00042LA Categories: ,

Description

Genuine Isotherm overheat thermostat (high-limit safety cut-out) for the Basic and Slim marine water heaters. This is the safety backup that cuts power to the heating element if the water overheats, protecting the element and tank. Part SEA00042LA.

How the Isotherm overheat thermostat works with the operating thermostat

  • Operating thermostat (SEA00041LA): the everyday control that cycles the element to hold the storage temperature.
  • Overheat thermostat (this part, SEA00042LA): a high-limit safety set above the operating temperature. It stays inactive in normal use and only opens if the water overheats.

Think of it as the backstop: if the operating thermostat fails to switch off, or another fault drives the water too hot, the overheat thermostat isolates the element.

Why it trips

The overheat thermostat rarely fails on its own — a trip almost always points to an underlying fault:

  • A stuck-closed operating thermostat driving the water too hot
  • Heavy scale insulating the element and making it overheat
  • Dry-firing the element (energised with the tank not full)

If it has tripped, find and clear the underlying cause before returning the heater to service — do not simply reset or replace it and re-energise. Confirm whether your unit’s overheat device resets or must be replaced.

Genuine marine-rated part

Fit only the genuine Isotemp overheat thermostat — it is calibrated to the correct cut-out point and built for the marine environment. Never bypass it or substitute a domestic part; it is the tank’s last-line thermal protection.

Is the heater dead? Fault-finding

A water heater that has gone completely cold with no obvious cause is a classic tripped-overheat symptom. Before condemning the element or the operating thermostat, check whether the overheat thermostat has opened — and if so, why.

Fitting

Installation involves electrical work — to be carried out by a competent, appropriately qualified person: a licensed electrician, or a suitably qualified marine engineer working within the scope of their certificate on the vessel’s own systems. Isolate power before removal.

Additional information

Brand

Isotherm (Isotemp)

Type

Overheat / high-limit safety thermostat

Function

Cuts element power on over-temperature

Fits

Basic & Slim water heaters

Part No

SEA00042LA

Installation

Electrical work — licensed electrician or qualified marine engineer