Description
The Gianneschi EL-SR EL-ST is the top of the axial range — engineered for mega-yacht engine rooms that need high airflow at medium-to-high pressure, where a standard axial fan runs out of puff. A downstream guide-vane (straightener) section lifts pressure, efficiency and noise performance to best-in-class.
Gianneschi EL-SR EL-ST — two impellers, one premium platform
- EL-SR — die-cast aluminium aerofoil impeller, manually adjustable pitch (set at standstill), dynamically balanced.
- EL-ST — the premium build: conical collet with cast-iron nozzle, Fe360B steel cap and spark-proof aluminium-alloy aerofoil blades, adjustable pitch at standstill.
Important: fixed flow direction (not reversible)
Because the straightener vanes work in one direction only, EL-SR / EL-ST run impeller-to-motor flow and are NOT reversible — unlike the ELL and ELL/AP series. Specify supply or extraction at order.
Key Features
- Downstream guide vanes — top-of-range pressure, efficiency and low noise
- Robust Fe360B steel casing with large suction nozzle; connection flange to DIN 24154
- Aerofoil impeller with manual variable pitch (set at standstill); EL-ST blades spark-proof
- Sizes Ø710–1000 mm; power 3–45 kW; up to ~330 mmH&sub2;O
- Three-phase: 230/400 V – 400/690 V AC, 50 Hz (60 Hz and double-speed on request)
- Class F insulation; IP55
Typical Superyacht Applications
- Mega-yacht engine rooms with high ventilation demand and back-pressure
- Long or restrictive supply/extraction ducting needing more pressure than a standard axial
- High-power gensets and machinery spaces
Model line-up
These guide-vane axials are the top of the range — built for high airflow at medium-to-high static pressure, with delivery to roughly 28 m³/s (~1,700 m³/min) and pressure to about 195 mmH₂O across the range (full flow/pressure curves are on the datasheet). EL-SR covers Ø710–800; EL-ST covers Ø710–1000. Blade pitch is set at standstill to trim duty.
| Series | Nominal Ø | Speed (rpm) | Motor (kW)1 |
|---|---|---|---|
| EL-SR | Ø710 mm | 1500 / 3000 | 3–7.5 / 15–30 |
| EL-SR | Ø800 mm | 1500 | 5.5–11 |
| EL-ST | Ø710 mm | 3000 | 15–45 |
| EL-ST | Ø800 mm | 1500 | 7.5–15 |
| EL-ST | Ø900 mm | 1500 | 11–30 |
| EL-ST | Ø1000 mm | 1500 | 18.5–45 |
1 Installed-power range across the frame’s blade-angle / speed builds. Three-phase 230/400 V or 400/690 V, 50 Hz (60 Hz and double-speed on request). Non-reversible (fixed blade-to-motor flow). Confirm duty at quote.
Configuration options
- Series — EL-SR (die-cast aluminium aerofoil impeller) or EL-ST (premium: cast-iron nozzle, Fe360B steel cap, spark-proof alloy blades).
- Nominal Size — Ø710–1000 mm; sets airflow and power (3–45 kW).
- Power Supply — three-phase only: 230/400 V or 400/690 V, 50 Hz (60 Hz on request).
- Speed — single-speed, or two-speed (double-speed) for selectable airflow.
Installation & Compatibility Notes
- Not reversible — confirm supply or extraction and airflow direction at order
- Three-phase supply required; DIN 24154 flange connection
- Three-phase motors suit variable-frequency control — pair with the Gianneschi Control Fan (G-Touch) VFD system for automatic engine-room temperature management
- For reversible or lower-pressure duties, use the ELL / ELL-R or ELL/AP series instead

