Catalina 340Z HP Inlet/Flush Hose Assembly

$193.39

High-pressure inlet and flush hose assembly for the Spectra Catalina 340Z (Z-Ion equipped). This assembly connects the feed pump module to the Clark Pump inlet and integrates the Z-Ion flush water circuit — it differs from the standard 340c assembly due to the additional Z-Ion plumbing path.

Add to Quote
SKU: SW-SUB-CT-Z-HPIBHA Categories: , Tags: ,

Description

Catalina 340Z HP Inlet/Flush Hose Assembly — genuine replacement hose for Z-ION-equipped Catalina watermakers. Y3 Marine.

About the Catalina 340Z HP Inlet/Flush Hose Assembly

The Catalina 340Z HP Inlet/Flush Hose Assembly is the combined high-pressure feed water inlet hose and Z-Ion fresh-water flush hose assembly for Catalina 340 systems fitted with the optional Z-Ion protection module. The Z-Ion variant requires a different hose assembly to the standard 340c because the Z-Ion unit replaces the conventional fresh water flush module and introduces metallic ions into the flush water path — requiring a dedicated hose circuit that routes through the Z-Ion generator bowl.

Why the Z-Ion assembly differs:

  • The standard Catalina 340c fresh water flush module uses a separate charcoal filter housing with a solenoid shut-off valve. The Z-Ion replaces this module entirely, with the Z-Ion control box and generator bowl in the flush water path.
  • The Z-Ion assembly routes flush water through the ion generator before it enters the membrane circuit, ensuring silver and copper ions are distributed throughout the entire system on every flush cycle.
  • Each Z-Ion flush cycle protects against biological fouling for up to 30 days; with this hose assembly correctly fitted and the Spectra Connect flush interval set to 30 days, the system can be left unattended for extended periods without SC-1 treatment.

Installation note: The Clark Pump and membrane module comes pre-mounted as a single unit. When separating the Clark Pump/membrane assembly for installation in a remote location, review the high-pressure tube assembly instructions in the Catalina 340c manual carefully — improper assembly of compression fittings will cause failure. Use two wrenches: 13/16″ to hold the base fitting and 7/8″ to tighten the compression nut.

Fits: Spectra Catalina 340Z (Z-Ion equipped). For the standard non-Z-Ion Catalina 340c, see SW-SUB-CT-Z-HPILHA.

Fitment & ordering

The Catalina 340Z HP Inlet/Flush Hose Assembly is a genuine Spectra part, supplied and supported by Y3 Marine for superyachts and commercial vessels. For the complete system see the Spectra Catalina watermaker, or browse our full Spectra Watermakers range. Contact Y3 Marine for fitment, cross-referencing and current stock. Reference: Spectra Watermakers.